Epson TM-C3500 Label Rewinder & Unwinder/Junction Plate Bundle with 3" Core Holder
The 3500x label unwinder & rewinder is great for printing your labels roll to roll. You can use up to 10 inch diameter label rolls on the Unwinder and run large label jobs. The junction plate makes sure that the unwinder and rewinder label path is fully aligned.
The position of the rewinder's tension arm is calibrated as follows:
a) When the printer forwards the media for printing, the tension arm goes down, the device rewinds the media.
b) When the tension arm is in the middle position, the device is idle.
c) When the printer pulls back the media, the tension arm goes up, the device unwinds it.
The position of the unwinders tension arm is calibrated as follows:
a) When the printer forwards the media for printing, the tension arm goes up, the device unwinds the media.
b) When the tension arm is in the middle position, the device is idle.
c) When the printer pulls back the media, the tension arm goes down, the device rewinds it.
Core Diameter: 3" Fixed Core Holder
Maximum Label Width: 5"
Maximum Roll Diameter: 10" outside diameter
An external power supply 100/240VAC - 2.5A at 24V allows an electronic circuit to provide, through the tension arm, the adjustment of the rotation speed and rotation direction. A 2A fuse is used as protection.
Epson TM-C3500 Junction Plate is Included in this package:
To guarantee that the media path is aligned with the printer and rewinder/unwinder paths, this junction plate is highly recommended to connect the rewinder and unwinder together. It offers also a customized sliding support where the printer position is fixed.
